TROCAR IDIOMA PT
9851 NW 58th St. – Unit 123
Doral – FL – 33178 – USA
Av. Corifeu de Azevedo Marques, 1703
São Paulo – SP – 05581-001 – Brazil
12 x 40W HIGH EFFICIENCY DIGITAL AMPLIFIER
The Absolute Acoustics® MDA-1240 is a 12-channel digital amplifier that delivers 40W of continuous power @ 8 Ohms or even more when used at lower impedance ratios or bridge mode. Its heart is powered by the traditional ICEpower™ modules, renowned for their sound quality and unmatched robustness.
With enough flexibility to meet the demands of custom installations of all types, MDA-1240 is the perfect complement to the Absolute speaker line. Each channel provides 40W RMS of continuous power into 8 Ohms, or 65W RMS into 4 Ohms, more than enough to feed high quality whole-house audio systems. This amplifier also works in bridge mode, where the outputs of two adjacent channels are combined to provide up to 100W RMS. All channels are safeguarded by individual protection circuits for overload, short circuit and overheat, protecting the amplifier and speakers from any adversities.
For ease of installation, the audio source for each channel can be selected either from a global input or direct channel input. The unit can be controlled directly through the main power switch on its front panel, through a trigger input located on the rear panel or automatically, sensing the audio signal.’
Each channel provides 40W RMS of continuous power into 8 ohms, or 65W RMS into 4 Ohms, more than enough to feed high quality whole-house audio systems.
In Bridge mode, the output from adjacent channels can be combined to deliver even more power, up to 100W RMS.
Inside each device, ICEpower® modules, the most admired and recognized digital amplifiers, featured in the world leading audio products.
Full array of input/output connectivity for maximum flexibility: line inputs, bus input/output and independent volume control per output.
Ultra-low distortion amplifying circuits provide clean and precise audio, even at high listening volumes.
All this technology is embedded in a compact 2U chassis, which makes the installation easier in furniture or professional racks.
1. Main power switch
2. Power status indicator
3. Channel protection indicators
4. Bus in/out connectors
5. Power on mode selector switch
6. 12V DC trigger output
7. 3-30V AC/DC trigger input
8. Channel gain adjustment knob
9. Channel input selector switch
10. Channel line input connector
11. Channel bridge mode selector switch
12. Channel speaker output
13. Chassis ground pin
14. AC power inlet
* Bridge mode is only available at 8 Ohms impedance.
2017 • Absolute Acoustics® • All Rights Reserved.